Sunday, October 9, 2011

Halloween Fancy Glass Pendant

This weekend we welcomed the lazy rain that fell and the cooler temperatures that came with it. It finally feels like fall here. This weather always makes me think of Halloween. I love decorating not only my house but also my wardrobe for Halloween. This week I wanted to share with you this fast and easy pendant project using Sakura's Retangular Fancy Glass, Gem Particles and 3D Crystal Lacquer!

For this project you will need:
Clip art of your favorite vintage Halloween scene/card [mine is from GraphicsFairy.com]
Cardstock
Brass wire or other finding to turn project into a pendant
velvet ribbon
Rectangular Fancy Glass
Gem Particles
Sakura Hobby Crafts 3D Crystal Lacquer

I printed my images onto heavy white cardstock, sizing them to fit my 1×2" piece of Fancy Glass. I trimmed my "card" so that the top and bottom were flush with the card before adhering it to my background piece.

I added a bead of 3D Crystal Lacquer above and below the "card" so that I could add yummy Peacock Gem Particles to the borders of the image.


Once happy with the placement of the gem particles, I added 3D Crystal Lacquer to the Fancy Glass and pressed it into place. Because the gem particles added a little bulk to the base underneath, I held the glass firmly down by placing a heavy paper punch on it while it dried.


Once dry, I trimmed out the pendant. You could at this point make this a fancy refrigerator magnet by adding a strong magnet to the back. I wanted to wear my beautiful creation so I pulled out some brass wire from my stash and created a simple wired wrapped cage to hold the Fancy Glass and to provide a bail for a ribbon to go through.



Thank you for looking! I hope you enjoyed my project!

Friday, October 7, 2011

Sapphire Pendant by Becky Conley

Hello! Welcome to another Sakura DT post. Today I'm sharing a pendant, it's quick and easy to assemble, but lots of drying time :o) and it's my FAVORITE color!

Supplies:
Blue Flash Gem Particles (3 colors available)
Black Coated pendant blank (1 5/8 x 1 1/2")
1/2" High Quality Fancy Glass Tile
Clear 3d Crystal Lacquer
Black Pearl 3d Crystal Lacquer

I used the Black Pearl 3d Crystal Lacquer to adhere the 1/2" High Quality Fine Glass tile to the Black Coated pendant base. Then, I put a thin coat of Clear 3d Crystal Lacquer inside the base to give the Blue Flash Gem Particles something to stick to. I covered the entire remaining base with the Gem Particles and then covered them with Clear 3d Crystal Lacquer. The only thing I wish I'd done differently is turn the High Quality Fine Glass Tile 45 degrees, looks like I'm going to have to make another one!

The light catches the Blue Flash Gem Particles and it's just beautiful.
Thanks for stopping by the blog!

Becky

Wednesday, October 5, 2011

Halloween Mail Art Tin

Halloween Mail Art Tin

Supplies Used
  • Halloween Stamps (Skeleton-Sunday International, Fence-Memory Makers Foam Stamp
  • Halloween Embellishments
  • Rhinestones
  • Washi Tape
  • Clear Cellophane Bag
  • Black Sharpie Pen
This was a fun project to create I love finding new ways to alter these large windowed tins, and then mail them as is through the mail. Don't let your postal person tell you that you can't. You can mail almost anything through the mail....even live chickens! LOL I've altered shoes and mailed them as is through the mail along with plastic bottles and tins. This would be a great project to create and send to college kid away from home, a grand child, niece or nephew just in time for Halloween or a birthday perhaps!
s-tin
Step 1:  Start with a blank large windowed tin and the following colors of 3D Crystal Lacquer (dark blue colored, pearl blue and clear). Open the tin and start applying both 3D colors on the inside of the plastic window. Fill in with the clear CL.
s-tin1
Step 2:  Use your finger to smooth it out evenly then set it aside to dry (you'll have to prop up the window lid, so it stays level. *Note-I originally applied some of the yellow to give a moonlight appearance but didn't like how it looked once it was dry so I went back and applied both blues over that area so it was evenly blue.
s-tin2
Step 3: Apply white gesso to your stamp using a make-up sponge (make sure to wash your stamp off right away). I choose gesso because I wanted a flat finish but you can also use white acrylic paint.
s-tin3
Step 4: I also stamped part of a picket fence.  Once paint has dried fill in white areas on the skeleton and fence with clear 3D Crystal Lacquer.
s-tin4
Step 5:  While lacquer is still wet sprinkle extra fine iridescent glitter dust over the wet areas.
s-tin7
Step 6: Next Add your choice of embellishments (I added a cardboard moon and bat I had in my stash). I also added some bling to my skeleton by adhering rhinestones (to his eyes and spine) using clear 3D Crystal Lacquer and a toothpick.
s-tin5
Step 7: Next use the yellow colored lacquer and fill in the moon around the bats (this will give it added dimension).
s-tin6
Step 8: While the moon is still wet sprinkle extra fine iridescent glitter dust over it.
s-tin8
Step 9:  To finish off the outside of my tin I added rub-on wording. Allow tin to completely dry.
s-tin9
Step 10: Open tin and add iridescent or paper grass to the inside and fill it with Halloween candy.
s-tin10
Step 11:  Seal your tin with some decorative washi tape.
s-tin11
Step 12: On the backside of the tin using your black sharpie marker write your to and from addresses.
s-tin12
Step 13: Once the tin has been addressed, to protect the tin on the outside slide it into a clear cellophane bag, secure it with tape and take it to your local post office to mail to be stamped and mailed.
s-tinfin
Booya!
SakuraLogo1


Click HERE to see more 
of my mail art.


Sunday, October 2, 2011

Sakura meets Alice

Today I'm doing less talking, more "pictorialing". :) 
I'm going to start by showing you the finished project...
(Beause I'm SO excited, I can't wait until the END of the post!)

Not the best photo, however, this is the end result!

This is what the frame looked like before.

First I sanded it. My husband says I have to sand EVERYTHING I paint. So... I listened!
Then I applied some Gesso.

Now comes the fun part... are you ready?!
I used Lindy's Stamp Gang starburst stains to apply the color.
Not only is it a sold, GORGEOUS color, but it's also glittery and beautiful!

Here it is all covered... (I used two different purples: Passionate Plum and Witch's Potion Purple.)

Then I used StazOn to stamp directly onto the frame. 
Make sure you wait until the ink has dried. (The starburst stains.)

Here's a closer look at the stamped image. (Truthfully, I just liked the shadow!)

So here's a better look at the image!

Once the entire frame was stamped, I covered it in Crystal Lacquer.
In the above photo, you can see most of the frame was covered, but part, was not. 


After I covered the entire frame, I added some german glitter glass in.. 
orange... purple... and black!

Here's the entire frame, after that was done.

In this photo, my daughter is 'painting' the mat with with 
Lindy's Stamp Gang starburst stains in: Tiger Lily Red Orange and Marigold Yellow Orange.

Once dry, I added Graphic 45's Wizard of Oz paper.

Thanks for visiting today! I hope you've enjoyed my frame! 

Saturday, October 1, 2011

Time to Scrapbook with SAKURA ®



Sakura ® Scrapbooking time.











Materials








Sakura crystal laquer




Sakura 3D crystal Lacquer pen metallic & pearl color pack




Special Effect Papercraft Papaya Iridecent




Iridecent glitter




Nikki Burnette's Stickers from www.aurella-art.com/index.html




Pumkins photo stickers




Antique pattern sissors




2 of you favorite photos




EK Success Moon & Stars border puncher







With the patterns sissors cut your favorite sticker out.




















Use the clear SAKURA® cover the entire image .
I did this with the pumpkins stikers also.













Sprinkle the clear irridecent glitter over the wet SAKURA®
I also cover the pumkins with glitter but I used orange iridecent.
The trick to enhance the stickers are use more glitter on the shadows of the
images. By doing this it will give a nicer effect on the 3D of the image.
I leave to dry overnight.








Put some double side tape behind each photo to mount them on the paper. I choose bright pink to enhance Nikki Burnette stickers.







I use the same pink to mount the Nikki Burnette's sticker.







Use your favorite puncher or EK Success Moon & Stars border puncher to puch a border on a 3 inches strip papaya iridescent paper. Place your Nikki Burnette's stickers on the buttom left corner to enhance your













SAKURA ® Crystal acquer pearl pens Green and Bronze to write your tittle
on your page I choose to use the name of the subject of the photo. I use the green to enhance the pumkins stems and the tittle. I left these to dry overnight.






The most important part of my pages are always the journaling. This will tell your story to the viewer and will tight the whole page togueter.






I choose the sticker and create the color scheme from it. All these simple elements togueter make a great page to treasure

Tuesday, September 27, 2011

Fall has arrived here on the mountain....leaves are changing color and nights are getting cooler. Boxes of Fall decorations are being brought out from storage - which means one thing - Halloween!

I adore Halloween decorating (and I must admit the candy!) so I'd thought I would share a Halloween themed post to get a jump on all of Halloween's goodness.








I used vintage sheets of music for the cone, and old dictionary paper for the flower. This project is really fun because you can use whatever papers you have on hand to coordinate with any theme you would like!

I used a paint brush to apply Crystal Lacquer to the scalloped edge of the cone and sprinkled it with orange glitter.
After the glitter was dry, I rolled the cone into it's shape and used Crystal Lacquer to adhere it.
To make the flower, I used 2 scalloped circles of old dictionary paper, crumpled them up several times and sprayed them with several layer of Glimmer Mist.
I used this little guy for the center of my flower. Here he is coated in a nice thick layer of Crystal Lacquer. I sprinkled a little fine clear glitter onto the wet Crystal Lacquer and set him aside to dry.
I used a Tim Holtz stamp for the ticket, stamped it with black Distress Ink and embossed it with clear embossing powder. To color it, I used Crystal Color Lacquer. I squeezed a little out in a puddle on the side of the stamped image, and used an old giftcard to scrap it across it. I used both purple and orange Crystal Color Lacquer.
Here you can see how awesome the ticket turned out. After it dried, I distressed the edges using a distressing tool and black Distress ink. I used a Dymo Label Maker to make the "BEWARE" label and stapled it to the flower, shredded some black paper in my paper shredder and used it to fill the cone. For the finishing touches, added some black ribbon for hanging and filled it with some candy corn!
Till next time....stay creative!

Karen

Please visit Sakura Hobby Craft for more info on their products