Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Wednesday, August 15, 2012

Turning a "Good Fortune" into a Stylish Altered Bangle

Happy Wednesday! What do you do with a leftover cardboard tape spool and a fortune from a fortune cookie??? Susan back again to share another project I've created using Sakura 3D Crystal Lacquer with Terri Sproul Mixers - this time I'm GREENCRAFTING!!!


I've made a CHIC artistic bangle out of a recycled cardboard tape spool that I have painted with Sakura 3D Crystal Lacquer and Terri Sproul Mixers and collaged with stamped paper misted with my Mixers Mist. The feature of my bangle is a fortune that I saved from a fortune cookie.


I cut a section away from the tube and cut the edges rounded. I sanded the edges with an emory board.


On a strip of scrap patterned paper, I stamped I used Viva Las Vegastamps! patent stamp #1687 with waterproof royal blue ink.


I misted paper with my sheer Mixers Mist to dampen paper. CLICK HERE to see post on how to make your own Mixers Mists.


Gently crumple the paper to break up fibers to that it is not so stiff - AND - it will give a nice suede texture.


I also misted with some bronze/copper penny Mixers Mist to add extra shimmer and this brings out detail of distressed paper. I set aside to dry.


I mixed up some Sakura 3D Crystal Lacquer and Garnet Pearl and Garnet Shimmer Terri Sproul Mixers to apply a base layer to the bangle.


I apply Garnet Mixers to base of tube with 2-3 coats to seal paper and also to build up a nice layer of color.


Completed painted cardboard bangle - which looks lovely just like this! But this is just a starting off point...I want to make it more "ME". So I'm going to make it all painted and inky, too! 


Now I adhere the stamped and painted paper I prepared in the beginning. I cut lines into the paper around the rounded sides to get a smooth wrap-around. I mounted my fortune to a rectangle of chipboard and adhered to bangle with Sakura 3D Crystal Lacquer. I finished off by painting entire bangle in a nice coat of Crystal Lacquer.

Presenting "Art-cycled" CHIC Bangle


My bangle is all artsy and recycled! It looks lovely...and is the perfect home for my GOOD FORTUNE "You feed your body every day. You must also feed your mind".

I hope you enjoyed today's post - and all of the projects I have created during my time with the Sakura Hobby Craft Design Team! I have had a wonderful time creating with Sakura Hobby Crafts products and I look forward to what the new Design Team dreams up. If you would like to continue to keep up with me and my creative adventures - please visit my blog sbartist : painting in the dark by clicking here.

Keep Creating! Sb : )

Friday, July 6, 2012

Bottle Cap Wind Chimes

By Amanda Marks

Today I am taking using some found objects as well as bottle caps from The Bottle Cap Company to create a wind chime.



1.  Materials:
  • Old DVD/CD
  • Fiskars® Butterfly Punch
  • Fiskars® 1" Circle Punch
  • Terri Sprouls Mixers (Shimmers)
  • 15 Bottle Caps
  • Pokey Tool
  • 3D Crystal Lacquer
  • Jump Rings (lots - 75)
  • Bakers Twine
  • Acetate
  • Ruler
  • Spray Paint
2.  Mark off lines 1 1/2" and drawn lines.
3.  Poke holes 1/4" from the edge (there should be 5 holes).
4.  Mark a dot on each side of the bottle cap.
5.  Take a pokey tool pierce through the metal of the bottle cap.
6.  I wanted all of my bottle caps the same color, so I took spray paint and spray painted everything.
7.  Allow the spray paint to dry.
8.  Taking a 1" Circle punch and punch 15 circles.
9.  Take 3D Crystal Lacquer and add one circle to the inside of each bottle cap.  Add a mixer of Crystal Lacquer and Shimmer to Acetate.  Allow acetate to dry.  Take mixers and lacquer mixer and add to the inside of the bottle caps.  Allow the bottle caps to dry.
10.  Take butterfly punch and punch butterflies out of the acetate.  Add butterflies to the inside and the outside of the bottle caps with 3D Crystal Lacquer.
11.  Allow Crystal Lacquer to dry.
12.  Open jump ring.
13.  Place one jump ring through the hole.
14.  Attach a second jump ring to the first jump ring.
15.  Attach the other bottle cap to the jump ring.  Repeat until you have 1 - bottle cap on 3 jump rings, 2 - bottle caps hooked together, 3 bottle caps hooked together, 4 bottle caps hooked together, and 5 bottle caps hooked together.  Attach the bottle caps to the DVD with jump rings.  Take Bakers Twine and attach 5 pieces of twine to the top and create a hanger.  Hang outside.





Tuesday, May 15, 2012

Adding Depth and Dimension to Vintage Images using Sakura 3D Crystal Lacquer and Terri Sproul Mixers

Happy Wednesday! Susan back again to share another project I've created using my Sakura 3D Crystal Lacquer and Terri Sproul Mixers. 

Today I am adding accents and dimension to a vintage Holiday image using Sakura 3D Crystal Lacquer and Terri Sproul Mixers via a video how-to.

A brief description of how I started. I purchased a digital vintage image from AlteredPages.com. This is a vintage Christmas greeting {AP single 601} of a holiday storefront window. I printed out four copies onto a matte finish white cardstock. I figure four versions will be enough so that I can accent and dimensionalize the base layer, then add paint in accents to sections of the figures that I will cut out and raise with pop dots for a faux 3-D effect. I am going to accent the details using different colors of the Terri Sproul Mixers and also make the window dimensional by painting with Sakura 3D Crystal Lacquer and streaks of blue colored Crystal Lacquer.

Please watch the following video to see my process {you may want to grab a snack and a drink now}.

Video streaming by Ustream


I let my dimensional window dry all day until the cloudiness has turned clear {this was easy because I had to leave for work LOL}. I cut out the figures and sections to build up layers with 3D pop dots. Before adhering, I went around the edges of the pieces with creamy brown Cat's Eye Chalk ink.

Completed Embellished "Holiday Window" Image


This project has gone from subtle and flat to luxurious and dimensional. I just love the reflective qualities of the micas in the mixers. I originally planned to use this as a feature element for a holiday card - but it is so lovely, I think it will have to become a shadow box that will be cherished with my collection of handmade Christmas decorations.

I hope you enjoyed today's project. I bet you can't wait to run and get your Sakura Crystal Lacquer and Terri Sproul Mixers and get to your studio and play! Please take some time to stroll around through projects from the other Sakura Hobby Craft Design Team members for more great tips and ideas! See you next time on June 6, 2012.

If you have any questions, please leave a comment, select receive e-mail follow ups on comments and I will respond. If you would like to see more of my creations, please visit my blog sbartist : painting in the dark by clicking here.

Have a wonderfully crafty Wednesday : )

Tuesday, April 3, 2012

Painting a Midsummer's Eve Sky Using Sakura Crystal
Lacquer and Terri Sproul Mixers

Happy Wednesday - Susan here bringing you a project to start your creative April off and running...time to go to your craft room and get that altered book out that's screaming for some attention.


Today's project is an altered book spread. I paticipate in a local Altered Book Club round robin group which meets monthly. Each month we receive a different players' book and a technique in which to apply with the theme. This book was Fantasy Fairies and the technique was utilizing pockets. The pages are completely painted using Sakura Crystal Lacquer and Terri Sproul Mixers.

Since this theme is "Fantasy Fairies", I decided to paint a background that goes along with my personal fairy name "Feather Saturnfilter". I will explain briefly...there is an artist named Emma Davies who makes fabulous handmade Fairy Figurines. She also has a fairy name generator on her site. It's quite fun. CLICK HERE to see. Not only does this give you a name...it also gives you a little description too. I have created my fairy and a background based on the following description:

My Fairy is Feather Saturnfilter.
She is a trouble maker.
She lives in high places where the clouds meet the earth.
She is only seen on midsummer's eve.
She wears pale blue like the sky and has pale pink wings like a cicada.

Here's my fairy made out of handmade paper, fabric scraps,
two-tone purple yarn and hand-drawn wings.


This book was quite large about doll collecting. The pages were about 9" x 11" in size. I have a blend of gesso, light green and gold acrylic and glazing medium that I use as a primer base for blocking out pages. It covers up the text and photos, but remains a little translucent and gives a nice painted texture to work on. I also inked the edges of the pages with antique gold ink. Now I'm ready to create!


Layer one: I mixed up a generous amount of Sakura Crystal Lacquer with Green Pearl Mixer and painted the bottom half of the pages. This has resulted in a lovely pearl teal green. I waited about 5 minutes or so to dry. The ripples in paper are from the moisture of the wet media. The pages were a little thin so I glued two pages together with glue stick prior to starting. This is something you may want to keep in mind when selecting a book to alter. The thinner the pages, the more work you have to do in preparation/durability of altering, painting, etc.


Layer two: I mixed up and applied Citrine Pearl Mixer with Crystal Lacquer and overlapped the green. The citrine is a lovely bright sunny yellow and is perfect for my late summer sunset.

Detail of the brush work from base primer layer showing how it had been accented by the Mixers.


Layer three: I mixed up a generous amount of Sakura Crystal Lacquer with Red Pearl Mixer and painted the remaining area at top of each page. I overlapped the yellow with the red.

Now I let this dry for a little bit - about a 1/2 hour. Since I had painted on three layers. While waiting I went about preparing my accordion pocket tag holder, fibers and prepared my next layer to paint. There were a couple spotty areas that were still slightly tacky so I thought I might speed things up with my heat gun. **TIP TIME** You have be very careful to keep the heat gun far away from the surface. I don't recommend this unless you like a bubbly effect like this...


So I waited a little longer to dry. For the next layer I wanted to soften my sky into a proper sunset. The ripples in the paper simulate clouds {a happy accident}. I mixed up some Gold Dust and Citrine Pearl Mixers with a good amount of Crystal Lacquer. 


I painted this on and feathered out my overlapping colors.



The completed background. Then I began stamping with Hampton Art Dandelion stamp set using black Staz-On ink creating a ground area. This set has dandelions, plants and some butterflies and also a darling dragonfly.

    

ANOTHER **TIP**
I wanted to remove any possibility of pages sticking together if wax paper has been removed by other players. To do this I got out my trusty EK powder brush dispensing tool {this is a tool they came out with to deactivate exposed sticker adhesive when popping up with 3D dots}. I happen to have this and tons of other nifty crafty gadgets from teaching at my local scrapbooking store. You can also use a cotton ball to apply plain talcum powder. This tool is handy because it can get down in the crevice of the book. I also dusted all over the pages EXCEPT where I would be adhering my accordion pocket, fairy and framed description. DO NOT put POWDER where you intend to glue something - it will repel adhesive.


    

Detail of beautified Fairy name description thanks to some computer handiwork. The finishing touch is the furry fibers down the spine and laced through the tags in pocket accordion. Tags are made using an assortment of Robin's Nest papers - and colors organized like a rainbow [red, orange, yellow, green, blue & purple].

Completed altered book pages. I love it!!!

I hope you have enjoyed today's post and that you are inspired to go and create something. Please take a look around through the projects from my other Sakura Hobby Craft Design Team members for some great projects, tips and ideas! See you in two weeks on April 18rd, 2012.

If you have any questions, please leave a comment, select receive e-mail follow ups on comments and I will respond. If you would like to see more of my creations, please visit my blog sbartist : painting in the dark by clicking here.

Have a wonderful Wednesday : )

Tuesday, March 20, 2012

Image Transfer with Crystal Lacquer

Happy Wednesday - Susan here with my second post for the Sakura Hobby Craft Design Team. Today is part two of the post I shared on March 7th {CLICK HERE}.

As promised, today's project is a step-by-step on making an image transfer!



YES!!!
YOU CAN YOU MAKE AN IMAGE TRANSFER
using CRYSTAL LACQUER!!!

I love making image transfers, yet the process of it is so dragged out unless you do a box tape transfer {with this you are limited to the width of your tape and you get a super high gloss sheen from the tape}. I will be doing this so much more now! So I made a couple image transfers one of me at about 2 1/2 and the other of a photo of my father and I. I will say - with Crystal Lacquer - this process is accelerated by not only hours...but days!

There are several ways to go about making an image transfer. I like the method of using an acrylic gel medium. But it is too time consuming! So since I couldn't find any info doing this using Crystal Lacquer, I followed the same process as you would if using an acrylic gel medium.


You take a color laser copy of image to transfer on plain white paper and paint an even coat of Crystal Lacquer in one direction {either horizontally or vertically - one or the other. Then let dry completely. Then paint a second coat in the opposite direction. If you made first layer horizontal - layer two will be vertical. Let this layer dry completely then repeat with three more layers alternating direction of applying Crystal Lacquer {horizontal, then vertical, then horizontal, then vertical, etc.}, letting each layer thoroughly dry before adding next layer.

After applying 5 coats on Crystal Lacquer in alternating directions.


If Crystal Lacquer looks cloudy, then it's not completely dry. Set aside completely lacquered image which should have a canvas striation texture from alternating layers for a couple hours to dry. Lacquered image should be completely clear.


Lacquered images after completely dry and ready to soak.


Now the fun begins - time to get messy! You will need a shallow disk to soak image in water. Place image face down into water with paper side up. If needed hold down under water until all paper is saturated.


Wait about 10-15 minutes then you can begin to gently rub away the paper fibers. This is best done by rubbing in small circular motion until all paper is removed.



Be careful not to rub too fast or too hard, this is easily torn when wet. If you like a softer appearance, you can leave some of the paper fiber on. After paper removal is complete - gently pick up image and let water drip off. 


 Image transfer being removed from water after paper is rubbed off.


Then set to dry on wax paper with lacquer side face up. I also gently patted excess water top with a paper towel. The image will look cloudy again. Let dry until it's no longer cloudy and it will probably curl up on you. I can't guesstimate time it will take to dry - but I promise this is so much faster than alternative methods.


When dry your image transfer is ready to use. It will have a nice canvas-like texture and is pretty durable. You can trim around it and adhere over patterned paper, metallic sheets or on acetate. Whatever your creative heart desires. Use Crystal Lacquer to glue the image transfer down. I have a couple small tears in my transfer, but when glued down they are barely noticeable and add to the altered charm of the piece.




I gathered some of my hand-painted papers {using Terri Sproul Mixers and Crystal Lacquer} and one of my completed image transfers to create a tag. I adhered everything down with Crystal Lacquer {you may want to wear gloves for this - its quite sticky}. 

On a base tag - I glued down three of the painted
papers with Crystal Lacquer.


The Crystal Lacquer dries relatively quickly. I added some white pastel in the area where the face of my image transfer will be placed to mute some of the text. I brushed over with Crystal Lacquer, then after misting lightly with water, I applied the image transfer and gently rubbed into place with Crystal Lacquer on top as well to seal. I mixed up some more Voilet Shimmer Mixers and painted in the background around my adorable self. I learned to paint at a very young age...my first paint being Chocolate Cake!

Completed tag after adding some stamped images
and Caran D'Ache Water Crayons.

I hope you enjoyed today's post. I encourage you to take a look around through the projects from the other Sakura Hobby Craft Design Team members for some great tips and ideas! See you next month with my next creation on April 3rd, 2012.

If you have any questions, please leave a comment, select receive e-mail follow ups on comments and I will respond. If you would like to see more of my creations, please visit my blog sbartist : painting in the dark by clicking here.

Have a wonderful Wednesday : )

Sunday, November 13, 2011

Wintery Charms with VLVS! and Colored Lacquer


Wintery charms with Viva Las Vegastamps! and Sakura 3D colored lacquer
As the coolor temperatures approach and winter is a little over a month away, I'm in full gear creating gifts for friends and family and items for holiday wear. When I chose the snowflake background stamp to work with for my project sponsored by VivaLasVegaStamps!, I knew I wanted to create some fun charms. These charms are super easy to make and can add fun wintery embellishment to any item.
For this project you will need:
Tim Holtz Fragment Charms
Marvy Black Ink Pad 
Random winter colored cardstock--I used Basic Grey solids
Sakura Colored 3D Crystal Lacquer
jewelry findings, sanding paper, scissors

Begin by stamping in black the background stamp
onto your card stock.

Apply a small amount of colored lacquer [either 1 or 2 colors]
onto Fragment Charms.

Add to stamped image. Slide charm around a bit until it stops moving.



I really like how the two colors mix on the page when it spreads .



Once dry, remove the charm by cutting them out close to the plastic edge.
Lightly sand the edges to remove extra card stock. Punch the hole in the
card  stock to make charm usable. Print the backside of the charm with stamp.

Add findings to fragment charm. Here I've used homemade jumprings.


Add your charms to your item. Here I've chose to add them to a fiber necklace.
I hope you enjoyed my project! Thank you for looking!