it's all in the embellishments!

Here is a fun, easy and cheap embellishment. You can purchase or recycle a bottle cap.


First thing you need to do is flatten your bottle cap. You can do this in many different ways. I use my Sixxiz machine to flatten mine.











Next you want to stamp an image or use a sticker that will fit inside of your bottle cap. I used a snowflake stamp here. and a 1" circle punch to punch out the shape



Add a very small amount of 3-D Crystal Lacquer to the inside of the bottle cap. Very little this is your adhesive for your stamp image. Set aside for about 5 minutes to set up. I use my finger to make sure there are not air bubbles trap below the image.









First off - VERY sorry this photo is blurry... But I think you see what you need to.
After i let my 3-D Crystal Lacquer dry for a few minutes. I add more 3-D Crystal Lacquer to the top of the image. I start by going around the edge of the image and fill in the center. This works the best for me.
Options: you can add glitter to the wet 3-D Crystal Lacquer if you want. This project I did add some bling...




Here is the finished project I made. Full direction for this will be on my Blog on the 15th of December. This is a winter or Christmas tag, But you can make this embellishment for any project. Thing about the possibilities... Altered books, Scrapbook pages, magnets, ATC, and the list goes on and on......

would love to hear or see what you made. Post your project on our facebook wall... Please "like" us there and tell your friends. Lots of exciting stuff happen soon...

If you have any questions please let me a comment and I will try my best to answer. But leave us some love.....